Menu
Menu
Categories
Brands
533_0_20151020092900_img_b.jpg

MANUAL FLAME WEEDING PIRODISERBO MODEL P

Price
Query
(VAT 23% not included)
Observation:
SEE DELIVERY TIMES
SHIPPING PRICE NOT INCLUDED 
MANUAL FLAME WEEDING PIRODISERBO MODELO P

Very light thermal weeding equipment,
easy to use and consists of the following parts:

- 1 Metallic tube equipped with 10 meters of hose
- 1 Complete burner with a support strap
- 1 Full Pressure reducer with safety valve

- This equipment is used in small areas, such as
  (Gravel path, small squares, in cemeteries, maintenance of
  sidewalks, operations located ...) where ease of use and
  easy portability, are its fundamental characteristics.
- The feeding equipment of the pipe has a metallic jacket
  outside to preserve it from any scratches.
  It is available in different lengths from 2 to 10 meters.
- The useful working width can be varied from 4 to 40 cm, with the substitution of
 burner or by mounting a cylinder head with two burners.
- The GPL consumption in kg / hour varies according to the type of burner
  used (1.5 to 4.5 kg / h) and this type of cover crop.
- Possibility of increasing the pressure of work, usually set between 1.0 bar to 1.3 bar.
- The total weight of machine 10 meters tube is approximately 3.0 kg.


.



.
.
 
WORKING PRINCIPLE OF THERMAL MONDA ECOLOGICAL

The main advantage of thinning by fire is that, no harmful waste is left on the floor;
In fact, the gas burns form only water vapor and carbon dioxide. The principle of
Operating ecological weeding flame, is that this technique produces an intense heat that "boils" the
weeds. The flame carefully directed and controlled briefly passes over weeds
without reaching will carbonization. The brief exposure to intense heat causes the cell cytoplasm expand
and in turn, breaks down the cell walls and disrupts intracellular feed stream. nutrients
They do not reach the cell; within a day or two, the weeds die due to continuous evaporation caused
By cuticles. The flame weeding does not really burn the weeds, but to be heat treated,
weeds undergo a change in pigmentation and green foliage color enhancing highly weeding.
This is quite clearly a couple of minutes after this method is applied, leaving the cell sap. The result of
Success of this method can clearly be seen a few days after application, the plants as shown
common leaf yellowing and withering. It is essential to know the appropriate application time for the heat
applied reaches the correct temperature in the plant thus reaching all the cells and the end result is 100% effective.
If this method is used on plants in their early growth phase (20-25 days after the operation), it will be
necessary to apply heat to 90-95 ° C just one second in order to kill those born these herbs.
Apply heat to 101 ° C for a second plant in a more advanced stage of growth.
Thus, in practice, it is necessary to apply excess heat to vary the plant heat exposure time
They are inflamed. In summary, we can assume a flaming time for the "second" in order to safely use
a temperature above 100 ° C in all plants. As a result of explosion of cells after absorption
heat, weeds abruptly change color to a darker shade. This shows the speed of the
operator is suitable for plants and weeds were properly and inflamed. In turn,
It helps optimize the results in the production and consumption of fuel. Speaking ecologically weeding
ecological flame has an almost negligible impact on the environment.

As the burning gas, creates water vapor and carbon dioxide, the flame used is transparent and releases almost
no fumes. Therefore, any kind of pavement which do not burn or coating may be treated with flame without
change the color. The heating is achieved rapidly passing the torch on the layers below the surface.
In general the temperature applied does not pass over 50-60 ° C, values ​​that are more easily found in hours
hot in the summer. Therefore, the damage to the microflora and microorganisms in the soil is minimal; there is no risk to
operators and no toxic elements released into the atmosphere. With respect to environmental health, application
Slow ecological flame thinning, has an additional advantage.
When the surface of the soil, asphalt or concrete surface is treated by flame at a slow speed, reaches temperatures
slightly higher (80 - 90 ° C). Therefore, it is sterilized and eliminating any pathogenic germs.


By choosing this technology, the costs are easy to estimate how much the ecological weeding flame does not pollute the environment,
there are no costs or disposal of toxic waste extra aftertreatment.
Gas consumption is directly linked to the type of equipment used, the height of the weeds and the flame used
treatment. The most favorable condition for use ecological flame mounts, is when the weeds are in their
initial growth phase (1-10 cm). This time is when the best results are achieved with a
fast working speed and with low gas consumption. Portable equipamentops are very versatile. They are easy
to use, but require higher consumer costs as compared with the equipment mounted
or towed by a tractor. Operating costs for ecological weeding equipment flame are minimized by
that they have a system that insulates heat, thinning the main element ecological flame. It is usual the breeding systems
by thermal portable calls are generally used for small or where the versatility of use and structure areas
Compact are key factors.
The website uses cookies to ensure you get the best experience on our website.